Our Services

Professional Automotive Services, Brought to Your Door

From ECU remapping to lost car keys — we cover a wide range of specialist automotive services across Huddersfield and West Yorkshire. All fully mobile, all using professional-grade equipment.

How much power could your car gain?

Use our free ECU power calculator to see estimated power and torque gains for your exact make, model and engine.

Open Power Calculator
ECU Remapping & Performance Tuning
Unlock your vehicle's true potential

ECU Remapping & Performance Tuning

ECU remapping involves modifying the software that controls your engine's management system. The factory settings on most vehicles are deliberately conservative — designed to account for varying fuel quality, different markets and service intervals. A professional remap adjusts these parameters to better suit your vehicle and how you drive it.

  • Increased power and torque output
  • Improved throttle response and driveability
  • Better fuel economy on diesel vehicles
  • Smoother power delivery throughout the rev range

We also offer economy remaps for drivers looking to reduce fuel costs, and DPF, EGR and AdBlue solutions where required.

Get a Quote
Car Key Cutting & Programming
Lost keys, spare keys, all keys lost — we've got you covered

Car Key Cutting & Programming

Losing your car keys or needing a spare shouldn't mean an expensive main dealer visit. We provide professional car key cutting and programming on-site, covering a wide range of vehicle makes and models. Whether you need a spare key, have lost all your keys, or need a replacement key fob programmed, we can help.

  • Spare key cutting and programming
  • All keys lost solutions — new keys programmed from scratch
  • Remote fob and proximity key programming
  • Wide coverage of makes and models

We carry specialist key cutting and programming equipment to handle most vehicles on-site at your location.

Get a Quote
Advanced Vehicle Diagnostics
Find the fault — not just the warning light

Advanced Vehicle Diagnostics

A warning light on your dashboard can mean many things. Our advanced diagnostic equipment goes beyond basic OBD code readers, accessing individual modules across your vehicle's systems to identify the root cause of faults — not just the symptom. We provide a clear explanation of what we find and what it means for your vehicle.

  • Full multi-system diagnostic scans
  • Live data analysis and fault tracing
  • Engine, transmission, ABS, airbag and body systems
  • Clear, jargon-free explanation of findings

Useful before buying a used vehicle, after a warning light appears, or when a garage needs a second opinion on a difficult fault.

Get a Quote
ECU Cloning & Programming
Replacement ECUs programmed and ready to go

ECU Cloning & Programming

When an ECU fails or needs replacing, simply fitting a second-hand unit often isn't enough — it needs to be programmed to match your vehicle. We carry out ECU cloning (copying the data from your existing unit to a replacement), virgin ECU programming, and module replacement coding for a wide range of vehicles.

  • ECU cloning from faulty or damaged units
  • Virgin ECU programming and initialisation
  • Replacement module coding and adaptation
  • Avoids expensive main dealer programming fees

Particularly useful for garages and trade customers handling engine management replacements.

Post-in service available

We also offer a post-in service for ECU cloning — simply send us your ECU and we'll clone or program it and return it to you, ready to fit.

Get a Quote
Immobiliser Programming
Immobiliser faults and anti-theft system solutions

Immobiliser Programming

Immobiliser faults can leave your vehicle unable to start, even when there's nothing mechanically wrong. We diagnose and resolve immobiliser issues, carry out module programming and handle anti-theft system solutions for most makes and models — all on-site at your location.

  • Immobiliser fault diagnosis and repair
  • Module programming and synchronisation
  • Anti-theft system solutions
  • Wide vehicle coverage

Immobiliser faults are often misdiagnosed — our specialist equipment gives us a clear picture of what's actually happening.

Get a Quote
AdBlue / DEF Solutions
Diesel exhaust fluid system diagnostics and repair

AdBlue / DEF Solutions

AdBlue (Diesel Exhaust Fluid) systems are fitted to most modern diesel vehicles to reduce emissions. When the system develops a fault, it can trigger warning lights and — if left unresolved — prevent the vehicle from starting. We diagnose AdBlue system faults and provide appropriate solutions for a range of diesel vehicles.

  • AdBlue system fault diagnosis
  • SCR catalyst and NOx sensor fault finding
  • Warning light investigation and reset
  • Suitable for cars, vans and light commercial vehicles

AdBlue faults should be addressed promptly — some vehicles will refuse to start after a set number of ignition cycles with an active fault.

Get a Quote
DPF Solutions & Cleaning
On-car DPF cleaning and ECU DPF solutions

DPF Solutions & Cleaning

The Diesel Particulate Filter (DPF) is designed to trap soot from your exhaust, but over time — especially on vehicles used for short journeys — it can become blocked. A blocked DPF causes warning lights, reduced performance and can lead to costly replacement if left untreated. We offer professional on-car DPF cleaning using specialist equipment, as well as ECU-based DPF solutions for vehicles where a software approach is required.

  • On-car DPF cleaning without removal
  • ECU DPF solutions and software-based options
  • DPF warning light diagnosis and reset
  • Suitable for cars, vans and light commercial vehicles

On-car cleaning is often a cost-effective alternative to full DPF replacement. We'll advise on the best approach for your vehicle and usage pattern.

Get a Quote
Vehicle Module Cloning
Clone and transfer control module data — no dealer required

Vehicle Module Cloning

When a control module fails or needs replacing, simply fitting a used unit rarely works without programming. We clone the data from your existing module directly to a replacement, preserving all vehicle-specific calibrations, adaptations and security data. This covers a wide range of modules beyond the ECU — including instrument clusters, body control modules (BCM), transmission control units (TCU), ABS modules and more. Cloning avoids the need for expensive dealer programming and gets your vehicle back on the road faster.

  • ECU, BCM, TCU, ABS and instrument cluster cloning
  • Data transfer from faulty or damaged modules
  • Preserves vehicle-specific calibrations and adaptations
  • Works with used or second-hand replacement units
  • Avoids costly main dealer programming fees

Module cloning is particularly useful when a unit has failed but the vehicle data is still intact. We assess each job individually — some modules require additional steps such as ISN matching or immobiliser synchronisation, which we also carry out.

Post-in service available

A post-in service is available for module cloning — send us your original and replacement units and we'll clone the data and return them ready to fit.

Get a Quote
BMW DME & IMMO Matching
ISN code matching for CAS modules — including CAS3+, CAS3++

BMW DME & IMMO Matching

When a BMW Digital Motor Electronics (DME) unit is replaced, the ISN (Individual Serial Number) stored in the DME must be matched to the CAS (Car Access System) module for the vehicle to start. Without correct ISN synchronisation, the immobiliser will prevent the engine from running. We carry out professional DME/IMMO matching across the BMW range, including the more complex CAS3+ and CAS3++ systems found on later E-series and early F-series vehicles.

  • DME to CAS ISN code reading and matching
  • CAS3, CAS3+ and CAS3++ module support
  • Second-hand DME adaptation and synchronisation
  • Resolves no-start conditions after DME replacement
  • Covers a wide range of BMW E-series and F-series models

CAS3+ and CAS3++ systems use encrypted ISN data — specialist tooling is required to read and write these values correctly. We use professional-grade BMW-specific equipment to ensure accurate matching without risk of module damage.

Post-in service available

A post-in service is available for BMW DME & IMMO matching — send us your DME and CAS modules and we'll carry out the ISN matching and return them ready to refit.

Get a Quote
Auto Electrical Fault Finding
Tracing complex electrical faults with specialist tools

Auto Electrical Fault Finding

Modern vehicles are packed with electronics, and electrical faults can be notoriously difficult to trace without the right equipment. We use specialist diagnostic tools to identify and resolve complex auto electrical issues — from intermittent faults and short circuits to module communication errors and wiring problems.

  • Complex electrical fault diagnosis
  • Module communication and CAN bus fault tracing
  • Intermittent fault investigation
  • Support for garages with difficult-to-diagnose issues

We work alongside garages and independent mechanics who need specialist electrical diagnostic support.

Get a Quote

Not sure which service you need?

Just get in touch and describe what's happening with your vehicle. We'll point you in the right direction and give you a straightforward quote.

Get a Quote